155
Inverter zwembad warmtepomp
NL
Winterklaar maken
6.2
Als de omgevingstemperatuur in de wintermaanden onder +3 °C daalt, moet een warmte-
pomp worden uitgeschakeld om vorstschade te voorkomen.
Winterklaar in 4 stappen
31
6. Maintenance and servicing
6.1 Maintenance and servicing
WARNING: Before undertaking maintenance work on the unit, ensure that you have disconnected
the electrical power supply.
Cleaning
The heat pump’s casing must be cleaned with a damp cloth. The use of detergents or other household
products could damage the surface of the casing and affect its properties.
The evaporator at the rear of the heat pump must be carefully cleaned with a vacuum cleaner and soft brush
attachment.
Annual maintenance
The following operations must be undertaken by a qualified person at least once a year.
√
Carry out safety checks.
√
Check the integrity of the electrical wiring.
√
Check the earthing connections.
√
Monitor the state of the pressure gauge and the presence of refrigerant.
6.2 Winter storage
In the winter months when the ambient temperature is lower than 3°C, a shut-down heat pump must be
winterised to avoid any frost damage.
Winterising in 4 steps
If a circulating pump is servo-controlled by the heat pump, drain this also.
Stap 1:
Koppel de warmtepomp los van de voeding.
31
6. Maintenance and servicing
6.1 Maintenance and servicing
WARNING: Before undertaking maintenance work on the unit, ensure that you have disconnected
the electrical power supply.
Cleaning
The heat pump’s casing must be cleaned with a damp cloth. The use of detergents or other household
products could damage the surface of the casing and affect its properties.
The evaporator at the rear of the heat pump must be carefully cleaned with a vacuum cleaner and soft brush
attachment.
Annual maintenance
The following operations must be undertaken by a qualified person at least once a year.
√
Carry out safety checks.
√
Check the integrity of the electrical wiring.
√
Check the earthing connections.
√
Monitor the state of the pressure gauge and the presence of refrigerant.
6.2 Winter storage
In the winter months when the ambient temperature is lower than 3°C, a shut-down heat pump must be
winterised to avoid any frost damage.
Winterising in 4 steps
If a circulating pump is servo-controlled by the heat pump, drain this also.
Stap 2:
Open de bypassklep en sluit de in- en uitlaatkleppen.
31
6. Maintenance and servicing
6.1 Maintenance and servicing
WARNING: Before undertaking maintenance work on the unit, ensure that you have disconnected
the electrical power supply.
Cleaning
The heat pump’s casing must be cleaned with a damp cloth. The use of detergents or other household
products could damage the surface of the casing and affect its properties.
The evaporator at the rear of the heat pump must be carefully cleaned with a vacuum cleaner and soft brush
attachment.
Annual maintenance
The following operations must be undertaken by a qualified person at least once a year.
√
Carry out safety checks.
√
Check the integrity of the electrical wiring.
√
Check the earthing connections.
√
Monitor the state of the pressure gauge and the presence of refrigerant.
6.2 Winter storage
In the winter months when the ambient temperature is lower than 3°C, a shut-down heat pump must be
winterised to avoid any frost damage.
Winterising in 4 steps
If a circulating pump is servo-controlled by the heat pump, drain this also.
Stap 3:
Schroef de aftapplug en het waterleidingen los, om al het
water af te voeren.
31
6. Maintenance and servicing
6.1 Maintenance and servicing
WARNING: Before undertaking maintenance work on the unit, ensure that you have disconnected
the electrical power supply.
Cleaning
The heat pump’s casing must be cleaned with a damp cloth. The use of detergents or other household
products could damage the surface of the casing and affect its properties.
The evaporator at the rear of the heat pump must be carefully cleaned with a vacuum cleaner and soft brush
attachment.
Annual maintenance
The following operations must be undertaken by a qualified person at least once a year.
√
Carry out safety checks.
√
Check the integrity of the electrical wiring.
√
Check the earthing connections.
√
Monitor the state of the pressure gauge and the presence of refrigerant.
6.2 Winter storage
In the winter months when the ambient temperature is lower than 3°C, a shut-down heat pump must be
winterised to avoid any frost damage.
Winterising in 4 steps
If a circulating pump is servo-controlled by the heat pump, drain this also.
Stap 4:
Schroef de aftapplug er weer in en sluit de twee leidingen
opnieuw aan of sluit deze met een doek om te voorkomen
dat vreemde voorwerpen in de circulatie terechtkomen.
Dek de warmtepomp af met de beschermhoes.
Als er een circulatiepomp op de warmtepomp is aangesloten,
laat deze dan ook leeglopen.
