background image

44

Fig. 39 - Wet

(DC Surface Mode)

Fig. 40 - Wet

(Watch Time Mode)

WET CONTACTS

The Wet Contact Dive Mode Activation feature is active any time
WET ACTIVATION is set ON.

The ATOM is configured with contacts that will automatically
activate Dive Mode when the space between the contacts is
bridged by a conductive material (immersed in water) and it
senses a Depth greater than 4 feet (1.2 meters).

The contacts are the pins of the PC Interface Data Port and one
or more of the Push Buttons.

As long as the contacts are bridged on the Surface, the graphic
WET will appear on the DC SURFACE MODE (Fig. 39), MAIN
TIME (Fig. 40), and ALTERNATE TIME displays as an alert the
that the unit is Wet.

Upon removing the bridge between the contacts (drying the
ATOM), the graphic WET will be replaced with the Altitude
graphic SEA (or LEV2 through LEV7) during Dive Surface Mode
or Week Day (MON - SUN) during Main and Alternate Time
Modes.

The ATOM will continue checking for Depth, until a dive is made
or it reverts to the Local Default Time screen after 2 hours.

Summary of Contents for ATOM

























































































































































Reviews: