![background image](http://html2.mh-extra.com/html/oceanic/atom/atom_operating-manual_3261896041.webp)
41
During the first 10 minutes after a dive, DC SURFACE MODE
remains on display as the DEFAULT screen. Main Time can be
viewed for 3 seconds during that period by pressing the M button
for 2 seconds.
When the 10 minute Surface Time has elapsed, the Local Default
Time screen (Main Time or Alternate Time) will replace the DC
Surface Mode display. DC Surface Mode can then be accessed
by pressing the M button 5 times (< 2 seconds each time).
DC SURFACE MODE (MAIN)
, information includes (Fig. 35):
> LINK symbol (if the Receiver is successfully Linked with a
Transmitter). Note that this is the same icon used in Watch
Mode to signify that the Daily Alarm is set On.
> Altitude Level graphic SEA (or LEV2 through LEV7), or WET
(if the unit is wet)
> Battery icon (if a Low Battery Warning Condition exists),
flashing if Too Low
> Ambient Temperature with icon and graphic F (or C)
> Symbol DIVE and Number of that dive (0 if no dive has been
made yet)
> Symbols SURFACE and TIME, and Surface Interval Time
(hour:minutes)
> NITROX symbol (if set for a Nitrox dive)
> Tissue Loading Bar Graph (TLBG), if any after a dive
Altitude Level Graphics
Represent the Following
SEA = 0 to 2,000 feet
(0 to 610 meters)
LEV2 = 2,001 to 4,000 feet
(611 to 1,220 m)
LEV3 = 4,001 to 6,000 feet
(1,221 to 1,830 m)
LEV4 = 6,001 to 8,000 feet
(1,831 to 2,440 m)
LEV5 = 8,001 to 10,000 feet
(2,441 to 3,050 m)
LEV6 = 10,001 to 12,000 feet
(3,051 to 3,660 m)
LEV7 = 12,001 to 14,000 feet
(3,661 to 4,270 m)
Fig. 35 - Surface Mode (Main)
a