Oce ColorStream, User Manual

Page: 307 / 524

Cleaning the Surface of the Printing System
Caution:
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger toner quantities, the industrial vacuum cleaner must
be explosion-proof.
Caution:
Before cleaning, observe the safety directives in the ‘Cleaning the Printing System —
Overview’ on page 268 section.
To Clean the Surface of the Printing System
#
Proceed as follows:
Clean the floor around the printing system with a vacuum cleaner. 1.
Caution
Fluid can get inside the printing system. This could cause irreparable damage
to the electrical and mechanical components.
Do not place cleaning fluids on top of or in the immediate vicinity of the
printing system and ensure that no fluids enter the printing system.
Cleaning the surface of the housing:
■
Add some mild household detergent to water and dip a soft cloth into the
solution.
■
Wring the cloth out well. Use it to wipe down the surface of the housing.
2.
Chapter 7 - Cleaning the Printing System 307
Cleaning the Surface of the Printing System