Oce 9400-I, User Manual

Page: 95 / 159

Customizing the printer 95
▼
Setting the double synchronization code paramete
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using t he or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using t he or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
CALCOMP SETUP
’ item using t he or button.
7
Press ‘next/select’ to enter the ‘
CALCOMP SETUP
’menu.
8
Select the ‘
DOUBLE SYNC
’ item using t he or button.
9
Press ‘next/select’ to enter the ‘
DOUBLE SYNC
’ menu.
10
Select the required double sync using the o r button.
11
Press ‘next/select’ to confirm the selected value.
12
Press ‘Program’ to exit the main menu.
CalComp step size
If the data format type is set to CalComp (manual, auto selection or remote
control command), seven steps or increments are provided (100 dpi to 4064
dpi). The default is 2032.
▼
Setting the appropriate step size
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using t he or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using t he or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
CALCOMP SETUP
’ item using t he or button.
7
Press ‘next/select’ to enter the ‘
CALCOMP SETUP
’menu.
8
Select the ‘
STEP SIZE
’ item using t he or button.
9
Press ‘next/select’ to enter the ‘
STEP SIZE
’menu.
10
Select the required value using th e or button.
11
Press ‘next/select’ to confirm the selected value.
12
Press ‘Program’ to exit the main menu.