Oce 9400-I, User Manual

Page: 90 / 159

90 Océ 9400-II User Manual
9
Press ‘next/select’ to enter the ‘
MERGE
’ menu.
10
Select ‘
YES
’ or ‘
NO
’ using th e or button.
11
Press ‘next/select’ to confirm the selected setting.
12
Press ‘Program’ to exit the main menu.
HP-RTL
HP-RTL is a subset of HP-GL/2. Therefore, all HP-RTL plot data files must
start with ESC%-1BBPIN: or BPIN.
To use HP-RTL, the SELECT FORMAT should be set to AUTO or HP-GL/2
on the operating panel, or HP-GL/2 must be selected via a remote control file.
Note:
HP-RTL plot data files must end with ESC%OB; PG; which will switch
the printer back to HP-GL/2 format mode. Without this command, the plot
results will be unpredictable and the printer will stop.
The following HP-RTL statements are not recognized by the Océ 9400-II and
will be treated as no-ops: ESC*v#a, ESC*v#b, ESC*v#c, ESC*v#i,
ESC*v#W[data], ESC*b#l and ESC&b#V[data].