Oce 9400-I, User Manual

Page: 94 / 159

94 Océ 9400-II User Manual
11
Press ‘next/select’ to confirm the selected value.
12
Press ‘Program’ to exit the main menu.
Synchronization code parameter
The synchronization code parameter is significant in all cases where CalComp
format is selected or auto-recognized, when select format is set to Auto or a
remote control command for CalComp has been sent.
The range of permitted values is 0 to 63
DEC
inclusive. The selected value is
the decimal equivalent of the byte interpreted as the beginning of a print data
block. The default synchronization code is 2.
▼
Setting the synchronization code paramete
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
CALCOMP SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
CALCOMP SETUP
’menu.
8
Select the ‘
SYNC CODE
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
SYNC CODE
’. menu.
10
Select the required sync code using the or button.
11
Press ‘next/select’ to confirm the selected sync code.
12
Press ‘Program’ to exit the main menu.
Double synchronization code parameter
The synchronization code parameter is significant in all cases where CalComp
format is selected or auto-recognized, when select format is set to Auto or a
remote control command for CalComp has been sent.
The double synchronization parameter allows one or two synchronization
characters to identify the beginning of a message of print data. If set to double
synchronization, the same character is sent twice. The default is ‘No’.