Oce 9400-I, User Manual

Page: 26 / 159

26 Océ 9400-II User Manual
8
Select the ‘
ID
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
ID
’ menu.
10
Select the required ‘
ID
’ (a value from 0 to 7) using the or button.
11
Press ‘next/select’ to confirm the selected ‘
ID
’.
12
Press ‘Program’ to exit the main menu.
13
Switch the printer off and then on again to activate the configured settings.
▼
Defining the terminato
The termination should be set to ‘ON’ if the Océ 9400-II is the last device on
the SCSI-2 chain. It should be set to ‘OFF’ if it is placed between other devices.
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ menu using th e or button.
3
Press ‘next/select’ to enter the ‘
CONFIGURATION
’ menu.
4
Select the ‘C
ONNECTIONS
’ menu using th e or button.
5
Press ‘next/select’ to enter the ‘
CONNECTION
’ menu.
6
Select the
SCSI-2
item using t he or button.
7
Press ‘next/select’ to enter the SCSI-2 menu.
8
Select the ‘
TERMINATION
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
TERMINATION
’ menu.
10
Select ‘
ON
/
OFF
’ using the o r button.
11
Press ‘next/select’ to confirm the required selection.
12
Press ‘Program’ to exit the main menu.
13
Turn the printer off and then on again to activate the configured settings.