Oce 9400-I, User Manual

Page: 12 / 159

12 Océ 9400-II User Manual
Buttons
‘Program’
To activate the program mode and to enter the top level menu. In
this mode, the user can use next/select’ the ‘previous’ and or buttons to
step through the menu.
Press Program’ again. If no action takes place for 1 minute in Program mode,
the machine will return to the status mode.
Note:
If you press the Program button while the printer is printing, the LED
above the program button flashes. As soon as the printing process is ready, you
will automatically enter the program mode. Keep in mind that the printer will
not print in Program mode.
‘Next/select’
To select an option or a setting in the menu. Or, if a submenu is
present, enter a lower-level menu.
‘Previous’
Pressing this button takes you one level higher in the menu
structure.
Browse buttons or
These two buttons are used to select another mode
at the same menu level, or to display the next or previous option from the
option list.
‘Cancel/continue’
This button is used to cancel the present print job or to
continue after an operator-recoverable error.
Display
The two-line LCD display provides status information on print jobs in normal
mode, and displays menu items in Program mode.
The following messages may appear during normal operation:
Status messages
indicates the actual status of the printer, e.g. ‘READY’,
‘PROCESSING’ etc.
Warning messages
the printer will continue to operate during a warning
message; however, it is likely that the print quality will not be optimal, e.g.
‘REFILL TONER’.