Oce 9400-I, User Manual

Page: 46 / 159

46 Océ 9400-II User Manual
4
While pressing the knob, slide the roll holder into the roll of print material (see
figur e11 on pa ge42).
Make sure that the knob is to the right, and that the paper appears as shown in
figure 11.
5
While pressing the knob, align the roll with the appropriate lines on the roll
holder
6
Place the roll holder with the material in the lower paper compartment (see
figur e16).
[16] Repositioning the roll
7
Feed the material between the input guide plates against the rollers. Turn the
rollers until the material is visible (see f igure17). You can also refer to the
sticker inside the drawer.
[17] Feeding the material
8
If you have inserted a roll with a different material or of a different width, you
must program the correct width and material type (see Programming media
settings’ on page 4 9 ).