Oce 3165, User Manual

Page: 94 / 206

94 Océ 3165 User Manual
‘To file’, the output is saved as a print file and the file can be printed on paper
at a later time. This setting is selected when files are to be printed by the central
repro department, and you must provide the CRD operator with print files. The
selection ‘To EPS’ defines the output to be saved as an EPS file which can be
included in another document (this setting is not available in the PCL printer
driver).
Note:
If the setting ‘To file’ or ‘To EPS’ is selected, you must specify here
the name and path where the file must be stored. However, each time you
print the same file name is used and each time the previous file is
overwritten by the new one.
4
Select the required setting for ‘Banner page’: the default ‘Automatic’ means
that the default setting of the DAC is used. When setting this option to ‘Yes’,
a banner page is printed with each print job.
5
Continue customizing other settings or click ‘OK’ to close the setup window.
Customizing font settings
When setting up your printer driver, you can also customize font policy by
your application.
PCL5 driver
When using the PCL5 printer driver, you can determine whether
the TrueType fonts on your PC are to be substituted by printer fonts (there are
43 printer fonts available). TrueType fonts are identified with a TT symbol in
the fonts list in the Control Panel.
PS driver
When using the PostScript printer driver, you can define additional
settings regarding font policy. These settings are gathered in the ‘Fonts’ tab. In
Windows NT 4.0 you will find this tab as part of the ‘Printer Properties’ (not
the ‘Document Defaults’).
Note:
When you select another printer (= driver) to print your document
(printer setup or page setup), your application may warn you that by doing so,
the layout may change. Whether the layout actually does change, depends on
the mapping of fonts in the font substitution table of the driver. When fonts are
converted to soft fonts, this will not be the case.
▼
Customizing font settings in the PCL printer driver
1
Open the setup window of the Océ 3165 printer driver as described in
‘Opening the setup window’ on page 88.
2
Click the ‘Output’ tab (see figure 48 on page 95).
3
Select the required setting for ‘Use printer fonts for all TrueType fonts’: