Oce 3165, User Manual

Page: 12 / 206

12 Océ 3165 User Manual
The second and third chapter review various basic and complicated copy jobs
and apply to all configurations.
Chapter 4 up to and including chapter 7 discuss matters which are related to
printing using the Océ 3165. These chapters are mainly interesting for the
Océ 3165 Network Copier and Océ 3165 PRO.
Chapter 8 and 9 deal with maintenance and clearing problems and are valid to
all configurations.
Overview of the Océ 3165
The Océ 3165 is simple to operate. The available functions are displayed
simply and comprehensively on the operating panel of the Océ 3165. This
makes it easy to choose the right settings for your copy job.
To assist you in finding parts of the copier and the functions on the operating
panel quickly, an illustration of the Océ 3165 is presented on the inside front
cover and of the operating panel on the inside back cover, both of which can
be folded out.
automatic feeder
Using the automatic document feeder you can make copies
from single- and double-sided originals in A3, A4, or A5 format. It is
especially useful to copy sets of originals such as reports. The physical limit of
the feeder is 50 sheets of 80 g/m
2
paper, but the maximum number of originals
in a set is determined by the size of the set memory. Originals can be added
while scanning is in progress.
glass platen
Books and magazines, as well as originals smaller than
148.5x210 mm (A5), cannot be copied using the automatic document feeder.
This is also for damaged originals, for bent or wrinkled originals, for some
paste-up originals (such originals with pasted sections) and for valuable
originals. For these types of originals, you should use the glass platen
paper trays
The trays in the paper compartment are equipped to handle many
sizes of copy material: depending on your configuration, a maximum of 1,750
or 2,250 sheets of A4 paper in the lower tray (tray 4). Trays 1 through 3 can
each hold a maximum of 500 sheets of 80 g/m
2
paper. Tray 1 can be adapted
to accommodate any paper size, whereas the sizes to be used in trays 2 and 3
are determined by the customer and fixed by the service technician. The paper
can be of different weights, orientation (
or ) and/or colours.