Oce 3165, User Manual

Page: 41 / 206

Basic copy jobs 41
The orientation of the original in the automatic feeder must correspond with
the feed orientation of the paper in the paper tray (see figure 18). This is the
only way a copy can be made that will match the page.
[18] Original and paper feed directions
Note:
It is impossible to make a 1:1 copy of an A5 original with this model of
the copier. This means that a copy of an A5 original can only be printed on A4
paper. It is also possible to reduce and print an A4 original to A5 paper.
Originals that do not have a standard DIN A-size (e.g. American paper sizes),
can also be inserted in the automatic feeder. However, their size will not be
recognised by the copier. Copying originals of non-standard sizes may lead to
information loss or to the appearance of grey borders around the edges of the
copy.
Note:
Special originals, such as books, magazines and small originals can be
copied using the glass platen (see ‘Copying special originals’ on page 43).
Originals which deviate slightly from the standard original sizes can also be
processed by the automatic feeder.
Copies of a size other than A4 portrait can be manually stapled (see ‘Stapling
copies’ on page 38).
▼
Copying standard sized originals using the automatic feeder
1
Place the entire set of originals face down against the left side of the tray in the
automatic feeder and adjust the original guides.
Note:
The originals must not be too curled. See also ‘Originals that can be
used’ on page 173. Remove any paper clips and staples.
The automatically selected paper size is shown above the ‘Paper’ section title.
If there is no identical paper size available, the nearest paper size is
A4
A4
A3
A5
paper sizes shown on
the display panel
A4
A4
A3
A5
feed direction of
an original for a
1:1 copy feed direction of an
original for a reduced/
enlarged copy
A4
A4
A3
A5