Oce 3165, User Manual

Page: 87 / 206

Installing the Océ 3165 as a printer 87
Setting up the Océ 3165 printer driver
When printing a document to the Océ 3165 Network Copier, the Océ 3165
print window will pop up after selecting the print command in an application.
In this window you can define the way the document will be printed, like
number of copies, stapling, 1 or 2 sided printing and so on. These are in fact
document-specific settings which will be applied to the document at hand.
However, there are also settings, which are applied to all documents to be
printed from any application using the Océ 3165 printer driver. These settings
include paper size, orientation, print method to be used and last but not least
how to print fonts you use in your documents.
These default settings are initially defined by Océ, but can be changed in the
setup window of the printer driver and then saved as your personal default
settings. The setup window is available in the Control Panel of your Windows
system. Changes made here apply for all applications.
Note:
You can also change the printer driver setup from the application you are
using. This setup is valid as long as your application is running and is in fact
a temporary setup for this application only.
Some settings are only selectable in the setup window, whereas other settings
are available in both the setup and the print command window. When you
customize settings selectable in both windows, these customized settings
appear in the print window when you are printing a document (except the
default number of copies, which will always be set to ‘1’). Typical settings
which you would define as default, and possibly overrule when printing
specific documents are: use of banner pages, 1 or 2 sided printing and stapling.
The settings which are exclusively defined in the setup window and are not
available in the print command window of your application are the following: