Oce 3165, User Manual

Page: 31 / 206

Introduction 31
Claiming the Océ 3165 Network Copier
You can use the Océ 3165 Network Copier for both copying and printing.
When using the Océ 3165 Network Copier for copying, you have to access the
‘Copy’ mode of the machine in which you can make settings for copy jobs
whereas the ‘Print’ mode is used for defining settings which apply to printing
jobs.
After starting up, the copier will be in initial mode, being the ‘Copy’ mode by
factory default (see ‘Standard settings’ on page 16). When the Océ 3165 is
mainly used for printing jobs, the key operator can change the initial mode into
‘Print’ mode.
You can switch from one mode to another by pressing the left function button,
which is called the application button (see figure 4 on page 18). The machine
will always finish the current job before you can start a new copy or print job.
When you send a direct print job, the machine will automatically switch to
printing, provided that the machine is not occupied with a copy job.
For stopping or interrupting a copy or print job, see ‘Stopping a job’ on
page 33.
▼
Claiming the Océ 3165 Network Copier for copying while ‘Print’ mode is
active
1
Press the application button once to switch to the ‘Copy’ mode.
[12] Copy mode
2
If necessary, enter your PIN code or use the copy charge device.
3
Make settings for your copy job.