Oce 3165, User Manual

Page: 37 / 206

Basic copy jobs 37
‘Extended copy jobs’ on page 47) to retrieve a completed document from the
finisher (see the inside of the front cover).
When making 2-sided copies, it can be defined in which direction the copies
are to be bound. You can also set an extra margin for the front and rear side of
2-sided copies (see ‘Defining the location and size of the binding edge’ on
page 56).
▼
Making sets of A4 copies
1
Remove any paper clips and staples (see ‘Removing staples from stapled
documents’ on page 39) and be sure the sheets do not stick together.
2
Place the originals (max. 50 sheets per batch) with the printed side face down
against the left side of the tray in the automatic document feeder.
Note:
The originals must all be the same size and must not be too curled.
See also ‘Originals that can be used’ on page 173. Remove any paper clips
and staples. Make sure all pages are separated from each other.
You can add new originals to the set of originals once feeding has started.
3
Adjust the original guides until they fit almost against the set of originals.
4
Indicate whether the originals are 1 or 2-sided and choose 1 or 2-sided copies
using the ‘Original’ and ‘Copy’ functions.
5
Enter the desired number of copies using the copy quantity buttons.
Once the job is started it is no longer possible to change the settings.
6
Press the start button ( ).
The originals are scanned in sheet by sheet and the image information is stored
in memory. During copying or printing, you can see the progress of the job in
the display.
While scanning, the machine starts printing the first set of the requested
number of copies. The original receiving tray on the right side of the machine
collects the originals after they have been scanned. You can remove the set of
originals as soon as the last original has been scanned.
The machine then continues with the production of any additional sets of
copies. A4 copies are by default delivered into the finisher. If the copier needs
your intervention (e.g. because the paper tray is empty), a message will appear
immediately on the display panel.