Oce 3165, User Manual

Page: 52 / 206

52 Océ 3165 User Manual
Using separation sheets
You can copy certain pages onto coloured or other material, using the
‘Separation sheet’ function within the ‘Paper’ section.
[24] Report with separation sheets
When copying double-sided, both sides of the separation sheet will be printed.
Each side corresponds to a page in the set of originals. If you select ‘Separation
sheet’ for an even page the previous page will also be selected, for an odd page
the next one will be selected. If one or both sides have to remain blank, use the
‘Blank page’ function (see ‘Specifying blank pages’ on page 55), possibly in
combination with additional blank original pages.
When copying two originals on one page side (see page 66) in combination
with double-sided copying, four originals are used to fill both sides of one
sheet. Be sure to program on the basis of four pages when using separation
sheets in combination with these settings.
▼
Copying reports with separation sheets
1
Before you start programming the copier, check what pages of your original
are to be defined as separation sheets.
2
Indicate whether the originals are 1 or 2-sided and choose 1 or 2-sided copies
using the ‘Original’ and ‘Copy’ function buttons.
3
Open the section ‘Paper’ by pressing the section button.
4
Select ‘Page settings’.
In the graphic display, the pages of the report are shown.
11
12
9
10
7
8
5
6
3
4
1
2
report of 12 pages
new chapters begin on
pages 5, 8 and 10 result:
chapters clearly recognizable
11
12
9
10
7
8
5
6
3
4
1
2