Oce 3122, Manual

Page: 216 / 244

Océ 3121 – Copying Manual – English
7-28
Cautions when Using the Film Projector
●
The film loading section of the Film Projector is heated by the projector lamp. If you handle the film
in the wrong way, it may become deformed or spoilt.
When making copies from 35 mm film, pay attention to the following to prevent the film from
becoming deformed by heat from the projector lamp.
· Remove the film from its protective bag or sheet, then place the film in the film carrier.
· Avoid using the Film Projector when the room temperature is 30° or above.
· When making repeated copies from the same film, allow the Film Projector to cool down after
using the Film Projector for 30 minutes.
●
If the Fresnel lens becomes dusty, the shadows caused by the dust may sometimes be reproduced
on the copy. If this happens, clean the Fresnel lens using a commercially available blower brush.
●
If the Fresnel lens becomes dirty or scratched during use, clean copies will not be reproduced. Store
the Fresnel lens on a flat location to prevent dirtying or scratches.
Main Specifications
· Max. power consumption : 80 W
· Size (W x D x H) : During use 204 x 301 x 436 mm
During storage 204 x 308 x 226 mm
· Weight : Approx. 4.3 kg
· Light source : Halogen lamp (12 V/50 W)