Oce 3122 Manual Download Page 112

Page: 112 / 244

Océ 3121 – Copying Manual – English

3-40

Making One-sided Copies from Two-sided Originals

➝

1-SIDED)

NOTICE

●

This feature can be used with the following combinations of model and options.

Original Placement

Where to place the original

Series Name

Platen glass

ADF

RDF

Océ 3121

Yes

This feature automatically turns over two-sided originals placed in the RDF to make one-sided copies.

NOTICE

●

Be certain to place the original horizontally when making copies from A4R, A5R and other horizontal sizes. If these
originals are placed vertically, the back of the copy will be printed upside down.

Place your originals in the RDF.

(See ”Placing Originals in the RDF,” on p. 2-16.)

Press the [TWO-SIDED] key.

Original

Copy

Summary of Contents for 3122





















































































































































































































































Search results

Summary of Contents for 3122

Reviews:

Related manuals for 3122

Brands by name

Popular brands

Oce 3122, Manual

Search results

Summary of Contents for 3122

Reviews:

Related manuals for 3122

Brands by name

Popular brands