Oce 3122, Manual

Page: 100 / 244

Océ 3121 – Copying Manual – English
3-28
Copy Ratio Specification and Required Paper Sizes and Quantities
When making an enlarged copy with a specified copy ratio, the size of the copy paper and the number
of sheets required for the resulting copy depend on the copy ratio that was specified. The following
table shows typical copy ratios and the size and number of sheets of copy paper required. Use this
table as a guide when determining the desired copy ratio.
■
When the original and output copy sheets are horizontal
Output Size/
Orientation
Original Size/
Orientation A3/Horizontal A4/Horizontal
Number of Copy Sheets at
Suitable Copy Paper Size
A0 x 2 / Horizontal 400% – A3 5 × 5 = 25 sheets
A0 / Horizontal 282% 400% A3 3 × 3 = 9 sheets
A1 / Horizontal 200% 282% A3 3 × 3 = 9 sheets
A2 / Horizontal 141% 200% A3 2 × 2 = 4 sheets
■
When the original and output copy sheets are vertical
Output Size/
Orientation
Original Size/
Orientation A4/Vertical
Number of Copy Sheets at
Suitable Copy Paper Size
A0 / Vertical 400% A3 3 × 5 = 15 sheets
A1 / Vertical 282% A3 2 × 3 = 6 sheets
A2 / Vertical 200% A3 2 × 2 = 4 sheets
NOTICE
●
The values shown in the above table are only meant as a guide. The actual values may be slightly different.
●
The resulting size after the printed copies have been cut and pasted together will be slightly smaller than the size
indicated in the above table.
●
For originals as large as A3-size, the copy ratio can be set freely from 25% to 800%.
MEMO
●
Horizontal placement and vertical placement are shown below.
Horizontal
placement
Vertical
placement
Far side
Near side
(closer to
the control
panel)