Oce 3122, Manual

Page: 149 / 244

Océ 3121 – Copying Manual – English
4-31
4 Set the center frame erase width (center width), then
press the [OK] key.
Use the Number keys or the [–] [+] keys to set the
center width. The center width can be set within the
range of 3 to 50 mm in 1 mm increments.
· Press the [+] key to increase the center width.
· Press the [–] key to decrease the center width.
5 Press the [DONE] key.
The display returns to the Basic Features screen.
Proceed to make copies in the usual way.
(See chapter 2, ”Basic Copying”.)
MEMO
●
To cancel settings, press the [SPECIAL FEATURES], [FRAME ERASE], and [C] keys in that order.
●
You can also cancel the mode by pressing the key. (The machine returns to the Standard mode.)
Erasing Binding Holes on Copies
(BINDING ERASE)
Erases the shadows that appear in copies from binding holes in originals.
☞
REQUEST
●
Copying originals with binding holes placed on the ADF or RDF may damage the original. Place such originals on
the platen glass.
MEMO
●
The frame erase width is set to 12 mm. This width can be changed.
Place your original on the platen glass with the edge
with the binding holes on the right.
(See ”Placing Originals on the Platen Glass,” on
p. 2-13.)
1
2
3
4
5
6
7
8
9
10