Oce 3122, Manual

Page: 202 / 244

Océ 3121 – Copying Manual – English
7-14
3 Slide the film to be copied into the 35 mm negative
film carrier.
NOTICE
●
Be sure to use 35 mm positive film carrier supplied with the Film
Projector.
●
The Letter ”R“ is written on the right side of the film carrier. Use
this mark as the reference when checking that the film is
inserted the right way up and is facing the correct direction.
●
Set the film so that the carrier windows are aligned with the film
frames.
4 Holding the positive film carrier level insert the carrier
into the right-hand side as far as
mark on the side
of the carrier (so that the empty frame is aligned).
5 Set the lamp switch to the position, and press the
[OK] key.
MEMO
●
When you turn the lamp switch ON, the Film Projector’s lamp
lights.
NOTICE
●
About 60 minutes after the lamp lights, it goes out. This is to
protect the film. To light the lamp after it has gone out, turn the
Film Projector’s power switch OFF then back ON again after a
short while.
6
After making sure that the lamp is lit, turn the light
adjustment dial to the left as far as it will go, and
press the [OK] key.