Oce 3122, Manual

Page: 186 / 244

Océ 3121 – Copying Manual – English
6-10
Recalling a Copy Job
Place your originals.
■
For instructions on how to place an original on the platen glass, see p. 2-13.
■
For instructions on how to place originals in the ADF, see p. 2-14.
■
For instructions on how to place originals in the RDF, see p. 2-16.
1 Press the [MODE MEMORY] key.
2
Select the memory key where the desired copy
setting is stored.
3
Check the copy settings stored to the memory key. If
the contents are correct, press the [OK] key.
MEMO
●
Recalling a copy job from memory cancels the current copy job.
●
After recalling a copy job from memory, you can change the
settings stored to that copy job.
●
If you press another memory key, the copy job stored to that key
is recalled.
3 Press the [DONE] key.
The display returns to the Basic Features screen.
Proceed to make copies in the usual way.
(See chapter 2, ”Basic Copying”.)
MEMO
●
You can also cancel the mode by pressing the key. (The machine returns to the Standard mode.)