Oce 3121, Technical & Service Manual

Page: 854 / 908

42 TSM Océ 3121 SDS Description
*3* ADJUST 06 Adjusting the AE/Fixing Assembly Settings
Item Description Settings Remarks
AE-SLOP When copying in AE mode with priority on
image quality, some types of originals generate
light images. If such is the case, use this mode to
adjust the copy image density. 1~19
FIXER-RES
IST Use it to enter the resistance of the fixing assem-
bly.
■
If you have replaced the fixing assembly, enter
the value recorded on the label attached to the
fixing assembly.
FILM
LANK Use it to enter the film thickness (fixing tempera-
ture control value).
■
If you have replaced the fixing assembly, enter
the value recorded on the label attached to the
fixing assembly, thereby setting the fixing tem-
perature control value.
0~4 Enter a value
higher then the
recorded value
by 1 to 2 if
shiny lines
(vertical) occur
on solid black
copiers.
ABC_TBL Use it to decrease the setting if the text density is
too low (light image) when executing AE mode
with priority on speed. 0~9
AE_LIGHT Use it to decrease the setting if the background of
the original is too conspicuous when using AE
mode with priority on image quality mode. 0~40
AE_DARK Use it to increase the setting if the text density is
too low (light image) when executing AE mode
with priority on image quality. 0~40
Resistance
to enter