Oce 3121, Technical & Service Manual

Page: 823 / 908

C
o
nf
id
en
ti
a
l ©
19
98
O
c
é
-T
ec
hn
ol
o
g
ie
s
B
.V
.
ed.1 SDS Description 11
Type Sensor Conditions RF operation Code
Re-circulating
lever idle swing S13 The re-circulating lever swung
idly without coming into con-
tact with an original immedi-
ately after the re-circulating
motor (M4) has started to oper-
ate. Stops immediately
upon detection. 01H
Pick-up fault S7 The sensor (S7) does not detect
the leading edge of an original
1500 ms after pick-up. The separation belt,
feeding roller, and
pick-up roller stop
immediately. The RDF
stops after delivering
the copy of the
advance original. 03H
Paper stopper
plate override S7 The original has ridden over the
paper stopper plate when the
original was set. Stops immediately
upon detection 05H
Different
number of orig-
inals after jam
removal S3 The number of originals set on
the tray is less than the number
of originals copied.
See Supplement. Stops immediately
upon detection 11H
Wrong number
of originals S3 The last original cannot be
detected because the re-circulat-
ing lever does not fall through
the original tray.
Reference:
Normally, the original tray
holds 50 sheets of A5, STMT,
A4, B5, or LTR, or 25 sheets of
A3, B4, 11”x17”, or LGL. Stops after counting
the 100th original 12H
Original forced
off S13 The re-circulating lever dropped
through the original tray while
an original was being processed. Stops immediately
upon detection 13H
Wrong original
size S3 The original that has been
picked up is of a non-default
size. Stops immediately
upon detection 14H
Wrong original
size or mixed
sizes in image
composition
mode (see note) S3 1) The original is of a size that
image composition mode does
not accommodate.
2) The original is of a size dif-
ferent from the first original. Stops immediately
upon detection. See
supplement. 15H
Not reset when
mode is
changed 1) When executing fax mode
without resetting after copying
mode.
2) When making a copy in the
middle of fax operation or when
making a copy without resetting
after fax mode. Stops operation imme-
diately upon detection 21H