Oce 3121, Technical & Service Manual

Page: 161 / 908

C
o
nf
id
en
ti
a
l ©
20
00
O
c
é
-T
ec
hn
ol
o
g
ie
s
B
.V
.
ed.2 Trouble shooting 53
SERVICE ERROR CODE
■
Service error code: output and display
Set bit 0 of SW1 under #SSSW (service data) to 1. This is to include service
error codes, when generating communications control reports, reception re-
sults reports, error transmission reports, or system dump lists. (The appropri-
ate error code will be displayed, in response to an error.)
Check the following, for specifics:
■
To increase the level of transmission,
Set service data #2MENU Parameter No. 07 to 0. (dBm).
■
To decrease the level of transmission,
Set service data #2MENU Parameter No. 07 to -15. (dBm).
■
Echo
Change the following bit switches of #1SSSW SW03 (service data):
bit 4 : 1 To ignore the first DIS signal sent by the other fax machine.
0 To ignore the first DIS signal sent by the other fax machine.
bit 5 : 1 To transmit a tone signal (1850 or 1650 Hz), when the other fax ma-
chine sends a DIS signal.
0 Not to transmit a tone signal, when the other fax machine sends a DIS sig-
nal.
#037 (recep) The memory overflowed during reception.
Main cause Action
■
The volume of reception (document) ex-
ceeded the limit, during reception.
■
Ask the other party to delete unnecessary
image data, prior to transmission.
#039 (trans) Failure of closed net transmission.
Main cause Action
■
The closed-net transmission switch is off.
■
The closed-net transmission switch of the
other party is off.
■
The closed net ID of the machine does not
match that of the other machine.
■
Set the closed-net transmission switch to 1.
(bit 7 of SW07 under #1SSSW, service da-
ta).
■
Ask the other party to turn on the closed-net
reception switch.
■
Match the closed net ID’s of both machines
(SW08 of #1SSSW).
#995 (trans/recep) Memory transmission reservation has been cancelled.
Main cause Action
■
The user has cancelled the memory trans-
mission reservation.
■
Ask the other party to start transmission.