Oce 3121, Technical & Service Manual

Page: 124 / 908

16 TSM Océ 3121/3122 Error code solving / machine fault solving
5 E007-01 The fixing film does not realign.
Cause Step Checks Yes/No Action
Front cover (the
switch actuator) 1 Switch OFF. Is the switch
actuator damaged? Yes Replace the front cover.
Roller 2 Have any of the rollers
slipped off? The lower
roller, the tension roller
or the cleaning roller. Yes Replace the fuser unit.
Fixing film 3 Is the film cut, or bent, or
torn? Yes Replace the fuser unit.
4 Have more than 200,000
copies been made with
the fixing unit? Yes Replace the fuser unit.
Releasing lever 5 Is the releasing lever
faulty? Yes Replace the fuser unit.
Detect lever 6 Is the tension spring of
the detect lever in good
condition? Also, does it
move smoothly? No Correct it.
Film sensor PS2 7 Is the sensor PS2 in good
condition? No Check the wiring
between: the DC control
PBA, via the connector
J47, to the sensor. If
undamaged, replace the
sensor.
M5 Fixing film
motor 8 Turn on the main power,
and reset the error using
‘ERROR’ in service
mode (*4*). When the
main power turns off
automatically thereafter,
turn it on once again, and
execute ‘FILM COME-
BACK’ in service mode
(*4*). Is the operation of
the fixing film motor
(M5) normal? No Replace the motor (M5).
Yes Replace the fuser unit.