Oce 3121, Technical & Service Manual

Page: 875 / 908

C
o
nf
id
en
ti
a
l ©
19
98
O
c
é
-T
ec
hn
ol
o
g
ie
s
B
.V
.
ed.1 SDS Description 63
7 *5* OPTION (settings mode)
Use this mode to set/change various machine settings (specifications).
■
Each press on the key brings up the next screen; each press on the
key, on the other hand, brings up the previous screen.
■
Press the desired item (notation on the screen) to highlight.
■
Use the keypad to enter numbers.
■
A press on the key will permanently store the entered value.
■
When done, be sure to turn off and then on the main power switch.
*5* OPTION 01 Setting the Copy Count and Shut-Off Slant Mode
Item Function Description
COPY-LIM Use it to change the
upper limit imposed on
the copy count. You may change the upper limit imposed on the
copy count between 1 and 100 (copies).
SHUT_OFF Use it to enable/disable
the sleep function. You may disable the auto shift function (time)
to sleep state.
IM-ANGLE Use it to switch slant
mode. Copies made in slant mode may become jag-
ged; change the setting of this mode from ‘0’ to
‘1’ if such a problem is noted.
COIN_OPERT Coin vender switching Select ‘1’ to support a coin vender.
DRM_MSG Use this to switch the
“Replace Drum” mes-
sage. 0: Will not indicate the Replace Drum message
on the control panel.
(default in 230V model)
1: Will indicate the Replace Drum message.
(default in 120V model)