O2 Xda Flame, Manual

Page: 169 / 218

10
Wireless Connectivity
To update IP info
Tap Start > Settings > Connections tab >
WiFi Utility > IP Info tab.
This tab shows all related IP address
information including DHCP, DNS, WINS
server and gateway, etc. for advance users.
Operation Buttons
• Renew – Renew IP address from DHCP
server for this Network card.
• Ping – Ping another IP/Host Name in the
network (refer to the picture below).
IP Address/Host Name : Enter an IP
address or host name to ping. When
a host name (eg. www.yahoo.com) is
entered, the
Resolve target name box
needs to be checked.
10.3 WiFi Utility
WiFi is a type of wireless local area network
that communicates between two devices via
high frequency radio waves. Your O
Xda
Flame supports Wireless LAN, which is IEEE
0.b/g compliant. It allows your device
to connect to the Internet with detected
wireless network.
To activate WiFi
. Tap Start > Settings > Connections tab
> Wireless Manager .
. Tap WirelessLAN to activate wireless
network.
. Tap OK to exit.
To check your WiFi status
Tap Start > Settings > Connections tab>
WiFi Utility .
. And you may see the details of your
phone’s wireless LAN connection,
including SSID, BSSID, Channel, Tx Rate,
IP Address, MAC address and Strength.
. Periodically updated scanning results in
the Active SSIDs window that lists all the
access points and peer stations available
around the host.
3. A configuration tool that enables you to
create and edit SSID profiles for your
station to associate or join with.
To configure WiFi settings
To Setup WLAN using WiFi Utility , Tap
Start > Settings > Connections tab > WiFi
Utility .