MI9601-00 • Issue B • September 2000 • Section 3: NV9601 Operation
Page 3-25
Multi-Destination Mode Display Description
Column 1 shows the current mode (Multi-Destination). If there are more than eight
devices, Column 1 also shows the page number.
Column 2 shows the preset sources, if any, for the selected destinations (i.e., those
destinations with a box next to them in Column 4). In Figure
3-2, no destination is selected so Column 2 is blank. In Figure 3-3, destinations VTR-
07, VTR-08SD, and VTR-09 have been selected and, therefore, the associated presets
appear in Column 2.
Column 3 shows the status of the primary level for each destination in Column 4. Note
that if the primary level of the source is locked, an L appears to the left of that source
and if protected, a P appears as shown in Figure 3-3. If the primary level of the source is
path locked or path protected (for NVISION data routers), an I appears to the left of the
destination.
Column 4 shows the destination assigned through the NV9601 Configuration Editor
and at the NV9601 Panel. Note that if the primary level of a destination is locked, an L
appears to the left of that destination and if protected, a P appears as shown in Figure 3-
3. If the primary level of a destination is path locked or path protected (for NVISION
data routers), an I appears to the left of the source.
