MI9601-00 • Issue B • September 2000 • Section 3: NV9601 Operation
Page 3-27
Performing a One Time Salvo (Multi-Destination Mode)
To allow multiple sources to be sent to multiple destinations, as in a one time salvo:
1. Ensure the [X-Y/Mult] button is in Multi mode (amber).
2. Select a destination:
a. Press [Page Up]/[Page Dn], if necessary, until the desired destination is on the
display.
127(
,Q0XOWL'HVWLQDWLRQPRGHGHVWLQDWLRQVHOHFWLRQVDUHPXWXDOO\
H[FOXVLYHXQOHVV
>+ROG@
LVDFWLYH
b. Press [1] - [8] below the display corresponding to the line where the desired
destination appears.
3. Select the source:
a. Press [Src]. All buttons appropriate for source selection go On in low intensity
green.
b. Press [(category)] (e.g., VTR). VTR appears in the middle of Column 1.
c. Press [(number)]. The selected number for the device appears in Column 1.
The preset will appear in Column 2 on the line of the selected destination.
4. Repeat steps 2 and 3 until all desired sources/destinations have been set.
5. Press [Take] to complete the switch.
