MI9601-00 • Issue B • September 2000 • Section 3: NV9601 Operation
Page 3-9
Panel
The Panel ID is an identification number assigned both at the panel and in the
Configuration Manager. These IDs must match in order for the panel to successfully
load its configuration from the
NV9000
server.
To change the Panel ID of this NV9601 Control Panel, or to view the Panel Name,
Panel ID, and the configuration file name, press [3] from the Menu display. The display
as shown below appears. The key pad buttons and [7] below the display go On (light),
and [8] remains On. Below is an example of the Panel display.
To change the Panel ID, use the key pad to enter the new ID and press [8] to save it. To
cancel a change before pressing [8] (Save), press [7] (Cancel) to return to the Menu
display or press [Menu] to return to the most recent selection display.
If this is a read-only panel (i.e., the system administrator’s PIN is required to change the
Panel ID) the display would show Enter PIN instead of Cancel. In this case, press [7].
The display as shown below appears.
If you are authorized, press [6] below the display to enter the PIN. The display as shown
below appears.
Menu
Panel
Use
Keypad to change ID
- - - - - - - 1
Panel Name Panel 3
Panel ID 1
Cfg File 9601 Rk1
Cancel 7
Save 8
Menu
Panel
Panel Name Panel 3
Panel ID 1
Cfg File 9601 Rk1
Enter PIN 6
Cancel 7
Menu
Panel
Use
Keypad to enter PIN
Cancel 7
Done 8
