Table 13. Link In: Molex Micro-Fit 3.0 Connector
Molex 43025-0400
Manufacturer
Molex Incorporated
Housing
43025-0400
Housing material
Nylon UL94V-0
Circuits
4
Crimp terminal
43030-0002
Wire gauge range
AWG20-24 stranded
Table 14. Link In Connector Pin Assignment
Pin
Connection
Description
Connected to Device
1
VBUS
DC power from Stack Controller, with Fault
Pilot Signal
Cell Interface
2
COM
Power return from Stack Controller
Cell Interface
3
IPA
Link Bus differential pair plus
Cell Interface
4
IMA
Link Bus differential pair minus
Cell Interface
Battery Cells
The Battery Cells connector provides cell voltage input and a means for balancing the cells. The cable
wire should be rated for at least 750mA to survive worse-case current.
Pins 8, 16, 17, and 18 are
No Connect
in the Cell Interface - 12 channel model. Pins 2, 4, 6, 8, 10, 11,
12, 13, 14, 15, 16, and 17 are
No Connect
in the Cell Interface - 12V 4 channel model.
All unused voltage inputs should be tied to the next highest potential voltage sense input. In this way,
all pins should be connected with the exception of pins 8, 16, 17 and 18 in the Cell Interface - 12
channel model and pins 2, 4, 6, 8, 10, 11, 12, 13, 14, 15, 16, and 17 in the Cell Interface - 12V 4
channel model.
Connect the battery cell voltage sense leads to this connector.
Nuvation Energy Stack Switchgear - Product Manual
Document ID: NE-PM-003
34
Rev 1.0, 2020-09-03
