The Mounting Bracket kit assembly adds an extra 14.2 mm to the overall width of the Cell Interface
module, bringing it from 104.4 mm to 118.6 mm. The kit assembly holds the module approximately 7
mm away from the inside lip of the DIN rail.
The Mounting Bracket offsets the Cell Interface module from the center of the DIN rail approximately
30 mm upwards as shown in
.
A Cell Interface with the Mounting Bracket weighs approximately 540 g.
Figure 19. Mechanical Drawing of Cell Interface with Cell Interface Mounting Bracket
(Bulkhead-to-DIN)
NRND variant with DIN rail mounting
The older Cell Interface, DIN Mount variant has been discontinued and is NRND (not recommended
for new design). New designs should use Cell Interface, Bulkhead variant with the Cell Interface
Mounting Bracket (Bulkhead-to-DIN) kit. The information below is provided for the purpose of
updating DIN rail mechanical designs.
The clips add an extra 19.6 mm to the overall width of the standard Cell Interface module, bringing it
from 104.4 mm to 124 mm. The clips also hold the module approximately 7mm away from the inside
lip of the DIN rail. The DIN enclosure vertically centers the module over the DIN rail, as shown in
A Cell Interface with DIN mountable enclosure weighs approximately 540 g.
Nuvation Energy Stack Switchgear - Product Manual
Document ID: NE-PM-003
28
Rev 1.0, 2020-09-03
