6.2. Connect to the Operator Interface
6.2.1. Overview
Ensure your computer is connected directly to the Stack Switchgear via an Ethernet cable. You will
need to configure the network adapter on your computer to match the settings on your Nuvation
Energy BMS.
6.2.2. Connecting to the Operator Interface
By default, Nuvation Energy BMS is configured with a static IP address of
192.168.1.21
. To connect to a
Nuvation Energy BMS that is using the default IP address:
1. Go to
Control Panel > All Control Panel Items > Network Connections
2. Right-click your network adapter that connects to your Nuvation Energy BMS and select
Properties
3. Click
Internet Protocol Version 4 (TCP/IPv4)
and click
Properties
Figure 31. Network Adapter Properties on Windows
Nuvation Energy Stack Switchgear - Product Manual
Document ID: NE-PM-003
50
Rev 1.0, 2020-09-03
