7. Using the Nuvation Energy BMS Operator Interface
7.1. The Dashboard Tab
7.1.1. Overview
The default tab of the Operator Interface is the Dashboard. The Dashboard contains a high-level
overview on the state of the battery stack. This is the only page required for daily monitoring of the
battery stack.
Figure 34. Nuvation Energy BMS Operator Interface Dashboard screenshot
7.1.2. Warnings and Faults
Before going into the details of the gauges and information presented in the dashboard, it is
important to understand what a fault and a warning Nuvation Energy BMS status means.
A Nuvation Energy BMS Warning indicates the state of the battery system has been
detected outside of its normal operational range. The cause of the warning should be
identified and a corrective action should be performed. For instance, if the warning is a
thermistor temperature measurement has become too hot, the battery system should be
cooled to bring the measurement back into the normal operational range.
Nuvation Energy Stack Switchgear - Product Manual
Document ID: NE-PM-003
60
Rev 1.0, 2020-09-03
