background image

Operating Instruction and Documentation 

                                                                                     4.80 H SST- 4.300 H SST 

 

- 2 - 

Contents

 

     

 

Foreword ................................................................................................................................. 3 
Record of installation .............................................................................................................. 5 
Record of handing over........................................................................................................... 6 

1.Introduction ............................................................................................................................. 7 

1.1 Installation and check of the automotive lift..................................................................... 7 
1.2 Information of Warning .................................................................................................... 7 

2.Master document of the automotive lift .................................................................................. 8 

2.1 Lift–manufacturer ............................................................................................................. 8 
2.2 Application........................................................................................................................ 8 
2.3 Changes at the construction .............................................................................................. 8 
2.4 Displacement of the automotive-lift ................................................................................. 8 
2.5 CE-Certificate ................................................................................................................... 9 

3. Technical Information .......................................................................................................... 11 

3.1 Technical ratings ............................................................................................................. 11 
3.2 Safety device ................................................................................................................... 11 
3.3 Data sheet........................................................................................................................ 13 
3.4 Foundation diagram drawing .......................................................................................... 14 

4. Safety regulations ................................................................................................................. 15 
5. Operating instructions .......................................................................................................... 16 

5.1 Lifting the vehicle ........................................................................................................... 16 
5.2 Lowering the vehicle....................................................................................................... 16 
5.3 Equalisation of the Lift ................................................................................................... 17 
5.4 Function Microprocessor / Display-advertisement ......................................................... 17 
5.5 The lift is not in the rule-window ................................................................................... 17 
5.6 Function of  the bypass-switch in case of unequal level of the platform........................ 17 

6.Troubleshooting .................................................................................................................... 18 

6.1 Driving on an obstacle .................................................................................................... 18 

6.1.1 Remove an obstacle .................................................................................................. 19 

6.2 Emergency lowering ....................................................................................................... 19 

6.2.1 Procedure of the emergency lowering ...................................................................... 19 

6.3 Reset the lift after an emergency lowering ..................................................................... 21 

7.Inspection and Maintenance of Nussbaum lifts .................................................................... 22 

7.1 Maintenance plan of the Mobile column lift................................................................... 22 
7.2 Cleaning of the Mobile column lift................................................................................. 23 

8.Security check ....................................................................................................................... 24 
9.Handing over and Initiation................................................................................................... 24 

9.1 Regulations ..................................................................................................................... 24 
9.3 Adjusting the rail............................................................................................................. 26 
9.4 Changing the installation place ....................................................................................... 26 
9.5 Initiation .......................................................................................................................... 27 
First security check before installation ................................................................................. 30 
Hydraulic diagram drawing .................................................................................................. 44 
Electrical diagram drawing ................................................................................................... 46 

 

   

Summary of Contents for 4.120 H SST































































Reviews: