Operating Instruction and Documentation
4.80 H SST- 4.300 H SST
- 12 -
If the lift descends noticeable faster there may be a problem with the hydraulic
system. The computer-control-system recognizes the problem and switch off the
hydraulic supply for the cylinder.
The Safety-star system locks and the lift stopped.
- Switch off the main switch.
- Check the complete hydraulic system. If the system is defective, call the service of
your retailer.
• The lift can be repaired by an expert, the satisfactory knowledge and experiences
with hydraulic ramps has.
CE-STOP (main lift and wheel free lift)
• The automotive lift stops automatically approx. 320 mm before the lowest position.
- Check the dangerous places of the lift and be sure that there are no objects or people
in the immediate area of the lift or on the lift.
- An acoustic signal is heard until the lift is in the lowest position
Top-Limit
• The Computer-control-system recognizes the top-height position of the lift and
switch off.
Summary of Contents for 4.120 H SST
Page 9: ...Operating Instruction and Documentation 4 80 H SST 4 300 H SST 9 2 5 CE Certificate ...
Page 10: ...Operating Instruction and Documentation 4 80 H SST 4 300 H SST 10 ...
Page 13: ...Operating Instruction and Documentation 4 80 H SST 4 300 H SST 13 3 3 Data sheet ...
Page 44: ...Operating Instruction and Documentation 4 80 H SST 4 300 H SST 44 Hydraulic diagram drawing ...
