Operating Instruction and Documentation
4.80 H SST- 4.300 H SST
- 16 -
5. Operating instructions
The Safety Regulations must be observed during working with the automotive lift.
Read the safety regulations in chapter 4 carefully before working with the lift!
5.1 Lifting the vehicle
• Drive vehicle over the lift, longitudinal axes on line of the lift.
• Block the vehicle against rolling, put into gear.
• Check the dangerous places of the lift and be sure that there are no objects or
people in the immediate area of the lift or on the lift.
• Switch on the control system; main switch on position ”1” (see pic.1)
• Raise the lift. Press the button „lifting“.
• Lift the vehicle on the working height
• In the display of the operating unit, the momentary height of the platform can be
read.
• Observe the complete process.
Pic 1: Operating unit
1 Button „Lifting“
2 Button „Lowering“
3
Button „equalization the platform“
4
Lighting switch
5
Keyboard and Display
6 Main switch
5.2 Lowering the vehicle
• Check the dangerous places of the lift and be sure that there are no objects or
people in the immediate area of the lift or on the lift.
• Lower the vehicle to the working height or until the platform reaches the lowest
point; press the button „lowering“ .
The lift is raising a few millimetre before the lift lowered (the safety device is
unlocking).
• Observe the complete process.
The lift stops before reaching the lowest position CE-Stop).
Summary of Contents for 4.120 H SST
Page 9: ...Operating Instruction and Documentation 4 80 H SST 4 300 H SST 9 2 5 CE Certificate ...
Page 10: ...Operating Instruction and Documentation 4 80 H SST 4 300 H SST 10 ...
Page 13: ...Operating Instruction and Documentation 4 80 H SST 4 300 H SST 13 3 3 Data sheet ...
Page 44: ...Operating Instruction and Documentation 4 80 H SST 4 300 H SST 44 Hydraulic diagram drawing ...
