Nussbaum 4.120 H SST, Operating Instruction And Documentation

Page: 41 / 62

Operating Instruction and Documentation
4.80 H SST- 4.300 H SST
- 41 -
3. Elapsed time indicator-ad
The number of the working hours can be extract through the operating. Press the button
< * > on the foil-keyboard of the lift.
Ad of the working hours in hours: minute
Only the time is counted, in which the lift
actually drives.
The return to the position-ad takes place automatically anuses approximately 15 seconds or
through operates of the < * > -button.
Function button:
< * > Return to the position-ad (2).
4. Service-operation
The service operation is used for it, during the initiation (installation) or to do the lift after
a disturbance in function again. Only for these two cases, this operating mode of the lift is
intended. Is not allowed to activate these functions, if the lift has the normal function. The
functions of the service operation can be activated over the foil-keyboard appropriate on
the switchbox. To the navigation in the menu system of the service functions serves the
buttons:
<*> menu-point
< #>confirms the menu-point
Through presses and confirming " zurück " you can go back from a submenu into the
higher ranking menu again.
4.1 Log-in in the service-operation
The operator must log-in in the service-operation to activate the service-functions. He
presses during the position-ad the button # and inputs afterwards SERVICE-PIN. After
correct input the PIN takes place automatically the change into the service-main menu.
Retrieval of the password for service-functions
Default-value of the password is ' 1234 '.
This can be altered with demand over the PC-Software, the new password is secured
durably with it in the FRAM of the „Achscontrollers“.
Function button:
<*> Back to the position-ad (2).
<0> ... < 9 > password input
Betriebsstunden
0000000:00 h
Passwort
- - - -