
8
4. CLEANING THE FIRE
a.
Allow to cool before cleaning.
b.
The outside of the glass can be cleaned as follows:
Clean glass using (preferably distilled) water and a soft lint free cloth ensuring the glass is dried thoroughly afterwards, again
using a lint free soft cloth.
If stubborn marks persist use a purpose produced Ceramic hob cleaner to clean the area again using a soft lint free cloth.
Under no circumstances must an abrasive cleaner be used as this will scratch the glass.
c.
If the fire also as an outer glass door this can be pulled open off its magnetic catches from the left side and can be
cleaned as detailed above.
d.
It is quite normal for soot to build-up on the inside of the glass panel over time.
The inside of the Glass Door can be cleaned as follows:
Open the outer door, by pulling on the centre of the left hand side.
Using the Pozidriv screwdriver provided unscrew the 2 screws to the Left Side of the door.
Follow instructions in section b. above.
e.
The logs must
not
be cleaned or moved.
f.
The outer surfaces of the fire can be cleaned with a damp lint free cloth, do
not
use abrasive cleaners.
! IMPORTANT NOTE !
Under no circumstances must the fire be operated without the glass door being fully closed and
secured.
5. SERVICING
a.
The fire should be Serviced Annually in accordance with the Gas Safety & Uses Regulations.
b.
This fire contains no User Serviceable Parts apart from the batteries.
c.
Servicing must be carried out by a Registered Installer.
d.
For Servicing or Spare Parts contact your Installer quoting the Fire Name, Model and Serial Number, which can be found on the
Data Badge. To find the Data Badge/Plate; with the fire cool open the outer door, the Data Badge/Plate can be found at the base
next to the Control.
e.
In the event that the fire shuts down due to any reason, attempt to restart it. If there is a continuing problem, call in a properly
qualified specialist engineer.
f.
Under No Circumstances
must this fire be used if the Glass Panel is broken damaged or cracked or if the Door Seal is
damaged.