NT-ware uniFLOW Release Station, Configuration Manual

Page: 33 / 56

uniFLOW Release Station
19
Example
An example of the PORT.ini would look like this:
[DIPORT2]
DEBOUNCE=20
EDGE=0
TIMEOUT=200
RULE1=2:3,0,-1,0 #copy A4 COL
RULE2=4:3,1,-1,0 #copy A3 COL
RULE3=1:3,2,-1,0 #copy A4 B/W
RULE4=3:3,3,-1,0 #copy A3 B/W
8.2.4 Network
This page displays the network configuration of the uniFLOW Release Station.

IP Address:
The IP address of the uniFLOW Release Station.

Netmask:
The network mask of the uniFLOW Release Station.

Gateway:
The gateway of the uniFLOW Release Station.

Activate DHCP:
If checked, the uniFLOW Release Station uses DHCP to obtain IP Address , Netmask
and Gateway automatically.
If unchecked, you have to enter IP Address , Netmask and Gateway manually for a
static IP address.

Proxy Type:
Here you can configure a proxy. This is necessary if your uniFLOW Release Station
has limited internet access. HTTPS internet access is needed for the uniFLOW
Release Station in order to communicate with uniFLOW Online.
o
None:
No proxy is configured.
o
HTTP:
Allows configuration of an HTTP proxy.
o
SOCKS:
Allows configuration of a SOCKS proxy.

Proxy Server:
The IP address and port of the proxy server.

Bypass Proxy for:
Here you can enter comma separated IP addresses and URLs the proxy shall be
bypassed for.

For lists of single hosts, the port has to be added. For example:
10.128.1.34:8443,W81X64CLI-34.test.example.com:8443

For lists with wildcards, no port is needed. For example:
10.128.1.*, 10.128.5.*,10.128.10.*