NT-ware uniFLOW Release Station, Configuration Manual

Page: 34 / 56

uniFLOW Release Station
20

Save & Reboot:
Saves the settings and reboots the uniFLOW Release Station to apply them.
IPv6 Support
uniFLOW Release Station does not support IPv6.
8.2.5 Support
Here you can export, show and clear the log of the uniFLOW Release Station. The
uniFLOW Release Station support team might request a copy of the log file, in order to
solve problems more effectively.
8.2.6 Upgrade
On this screen you can upload a file to update the firmware of the uniFLOW Release
Station. For more information, refer to chapter Firmware Update (on page
24 ).
8.2.7 uniFLOW Online
On this page, you can connect your uniFLOW Release Station with uniFLOW Online.
Parameters

Status:
Shows whether the uniFLOW Release Station is connected to uniFLOW Online.

Printer:
Enter the IP address or FQDN of the printer the uniFLOW Release Station is
connected to.
o
Obtain Printer Details via SNMP:
Check, if you want to obtain printer information like manufacturer, serial
number, device name, device location and model name automatically. The
printer details are forwarded to uniFLOW Online during the registration
process and are prefilled automatically.

Secret:
The secret value that has to be entered during the uniFLOW Online registration
process.

uniFLOW Online URL:
The URL of the uniFLOW Online tenant you want to connect the uniFLOW Release
Station with.
o
Save:
Save the URL before clicking on connect.