NT-ware uniFLOW Release Station, Configuration Manual

Page: 37 / 56

uniFLOW Release Station
23
8.2.9 Settings

Authentication for Config Settings on uniFLOW Server?:
If checked, only uniFLOW users with the ACL feature Administer enabled in
uniFLOW can login to the uniFLOW Release Station website using their uniFLOW
credentials (e.g.
LDAP Login ). The local username and password are disabled.
uniFLOW Release Station has to be connected to a uniFLOW Server.

Username (Local):
Here you can change the username for logging in to the uniFLOW Release Station
website. Disabled, if
Authentication for Config Settings on uniFLOW Server? is
checked.

New Password (Local):
Here you can change the password for logging in to the uniFLOW Release Station
website. Disabled, if
Authentication for Config Settings on uniFLOW Server? is
checked.

Retype New Password (Local):
Confirm your new password by retyping it here.

Save:
Save your settings.
8.2.10 Logout
Click Logout to log out the currently logged in user. You are transported back to the
login screen.
8.3 MiCard Configuration
The uniFLOW Release Station is available in versions with different integrated MiCard
card readers. These card readers are preconfigured with a standard configuration and
can be used in most cases without any further configuration necessary. However, if
you still want to configure specific settings for the card readers, you can do so under
Connections > Agents/Terminals > MiCard.
The MiCard PLUS and MiCard PLUS-2 V2 reader cannot be configured in uniFLOW.
Please use its configuration utility and upload a configuration file instead.
For more information, refer to chapter Card Reader (on page 16 ).
For more information about the MiCard specific settings available, please refer to
chapter MiCard Configuration in the uniFLOW User Manual.