NT-ware uniFLOW Release Station, Configuration Manual

Page: 38 / 56

uniFLOW Release Station
24
8.4 Factory Reset
It is possible to do a factory reset to the internal settings of the uniFLOW Release
Station:
1.
Create an empty text file with the name: ResetToFactoryDefaults.txt.
2.
Copy the file to the root folder of an USB drive formatted with FAT or FAT32 file
system.
3.
Connect the USB drive to the uniFLOW Release Station.
4.
The uniFLOW Release Station detects the USB drive and if it finds the file, it resets
the settings and automatically reboots.
The following settings are reset to default:

Release Station:
o
Name
o
Restrict HTTP access to IP
o
Session timeout
o
Contact server on interval
o
Language

Port Configuration:
o
The default ports configuration file is used.

Network:
o
Activate DHCP

Settings:
o
Authentication for Config Settings on uniFLOW Server?
o
Username (Local)
o
Password (Local)
The MiCard and MiCard PLUS configuration is not covered by the factory reset.
8.5 Firmware Update
It is possible to update the firmware of the uniFLOW Release Station. To do so, you
first have to download the newest firmware .apk file.
To obtain the newest firmware .apk file, please refer to uniFLOW Release Station -
Firmware (MOMKB-816 (
https://web.nt-ware.net/its/browse/MOMKB-816 )) in the
NT-ware Knowledgebase.
Please note that registration is required in order to access the NT-ware
Knowledgebase. Access to the NT-ware Knowledgebase is limited to trained Canon
personnel only. If you require the above document and you do not have access to the
NT-ware Knowledgebase, please contact your Canon partner.