NT-ware uniFLOW Release Station, Configuration Manual

Page: 23 / 56

uniFLOW Release Station
9
The general configuration set here is only used, if no settings are made under Specific
Settings (on page
10 ) for the corresponding uniFLOW Release Station.
List View
This section lists all configured EAI devices in uniFLOW. The uniFLOW Release Station is
listed here as well. The uniFLOW Release Station can be configured by clicking the
button. This will open a new window with device specific settings. Please refer to the
chapter Specific Settings (on page
10 ) for a detailed explanation of these options.
Network Configuration
Here you can configure the IP address of the uniFLOW Release Station.

IPs:
Currently configured EAI devices and their IP addresses.

Discovering Server:
Leave at default ( All ) unless you want to limit EAI discovery to single servers.

Device:
IP address of the uniFLOW Release Station.

EAI Server:
http://<uniFLOW_Release_Station>:8000/mom/eai.htm

Update interval in sec.:
The interval in which EAI devices are being detected by uniFLOW or an RPS.