NT-ware uniFLOW Release Station, Configuration Manual

Page: 49 / 56

uniFLOW Release Station
35
11.2 Mounting Options
There are different ways of mounting the uniFLOW Release Station. Depending on the
device manufacturer and model, the uniFLOW Release Station can either be attached
directly to the machine using a device bracket, be mounted on the wall or be set up on
a stand pole next to the machine.
Brackets are sold separately and are not included with the uniFLOW Release Station.
For a detailed list of all available mounting options, please refer to the NT-ware Device
Bracket Guide which can be found under Brackets/Mounting on the NT-ware Partner
Site (
https://web.nt-ware.net/partner/ ). Assembly instructions for each mounting
option can be found on the NT-ware Partner Site as well.
11.3 Compliance and Disposal Notes
FCC Compliance Notes (for USA)
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
IC Compliance Notes
For all models with integrated RFID functionality (uniFLOW Release Station Hitag, HID,
Multi, PLUS, PLUS-2 V2):