NSC Sicherheitstechnik GmbH
22/47
2011 / 04 / 26
Eckendorfer Str. 125 c
Installation Manual Solution F2 20110509.doc
33609 Bielefeld
Version S031A01.01
3. Menus for the installer:
The following menus are available only for the installer as the access is protected by a separate access
code. When the panel is shipped out by NSC the access code for the installer is :
00000
This access code can be changed by the installer. In any case it should be kept at a save place. When
the installer has changed this access code it is unique and nobody else can operate in the installer menus
of the panel.
Please keep the installer code (access code) in a save place.
It is the protection of the panel against wrong operation.
After pressing the push button
you will enter the main menu of the FCP "Solution F1“. Then
please press
F3 ("Installer“)
to enter the installer menus. After that the installer code is required.
To select sub menus you have the following possibilities :
•
Using the cursor keys
↓
and
↑
to mark the sub menu with the black background and then press
F4 ("Enter“) to confirm the selection.
•
Directly by pressing the number of the sub menu. No „Enter“ button is necessary in this case.
Some times you will see a listing of e.g. outputs, inputs etc. in the LC module. In which case usually there
is a selection bar like this :
↓
+1
↑
-1 Selection -> +10 <- -10
When there is such a selection bar you can use the cursor keys again and pressing F4 ("Enter“)
confirms the selection. The cursor keys
↓
and
↑
go one line down / up and the cursor keys
and
will
go 10 lines down / up.
There are some more standard operating functions:
•
"Cancel“ in the bottom line of the LC module (right above F1) means always jumping into the
menu before
•
The "ESC“ push button cancels the current typing but do not lead to a jump out of the menu.
Usually the bottom line of the LC module looks like this (if there are no additional options to F2 and F3):
Cancel Enter
