NS system Tango-B series, User Manual

Page: 33 / 123

No. Name Description
Range
Min. Max.
11 HTIME
* ALLOWABLE HOME TIME
Setting of the allowed time for home return. The unit is 0.1sec.
If home return is not successful within the allowed time owing to the
malfunction of home sensor, amplifier, mechanical error, etc., home
return stops and error message (
"HOME OVER TIME")
is displayed.
The time is infinite (ignored) when the value is set in "0".
For safety operation, be sure to use this function.
0 250
12 HTYPE
* HOME SENSOR OFF-EDGE DETECTION
Setting the method of home sensor off-edge detection for the exact
home position.
0 : off-edge detection by opposite direction to the home start.
1 :
off-edge detection by same direction with the home start.
Setup-14 "HMZPH" determines the function of home position by
encoder Z phase. If encoder Z phase is used, the rising edge of that
becomes the machine home position.
If the setting value of home offset (Setup-19 "HMOFF") is available,
home offset movement action is performed.
It is used for the work home position or precision adjustment of
machine home position.
0 1
13 HFILE
* COMPLEX HOME RETURN
Setting the program file number for complex home return.
It provides an another home return function which requires complex
motion (general home, additional motion, in/out functions, etc.).
0 General home return
1 ~ 15 Program file number for complex home return (max. 48 step)
0 15
14 HMZPH
* USE OF ENCODER Z PHASE
Setup-14 "HMZPH" determines the function of home position by
encoder Z phase. If encoder Z phase is used, the rising edge of that
becomes the ultra high precision machine home position.
If this function is used, the home position is not changed when needed
maintenance of home sensor.
0 Not used
1 Use the encoder Z phase signal
0 1