NPK M35G, Instruction Manual

Page: 8 / 118

-
8
-
INTRODUCTION
Thank you for your purchase of an NPK attachment. NPK prides itself in the design and
manufacture of high quality attachments. The quality workmanship and materials,
which go into all of our attachments, will provide maximum service life. With proper
care and use, your NPK attachment should provide you with many years of productive
service.
The purpose of this manual is to provide you with information and instructions required
to properly operate and maintain the M35 MATERIAL PROCESSOR. This will result in
maximum ATTACHMENT reliability and productivity.
Read this manual thoroughly before attempting to operate, remove, disassemble,
repair, or troubleshoot the MATERIAL PROCESSOR or any of its components. For
additional information or help with any problem encountered, please contact your
authorized NPK dealer.
Follow all the safety precautions
contained in this manual.
Failure to follow safety
precautions can result in death, personal injury, injury to others and property
damage.
Use replacement parts sold by NPK only. NPK is not responsible for failures resulting
from alterations not approved by NPK or substitution of parts not sold by NPK.
EXCAVATOR COMPATIBILITY
These carrier weight ranges are intended as a guideline only. Other factors, such as
stick length, counterweights, undercarriage, etc., must be taken into consideration.
Mounting a MATERIAL PROCESSOR that is too heavy for the carrier can be dangerous
and damage the carrier. Verify carrier stability with the MATERIAL PROCESSOR
before transport or operation.
Mounting a MATERIAL PROCESSOR that is too small for the carrier can damage the
MATERIAL PROCESSOR and void Warranties. Please consult NPK Service or
Engineering for specific detailed information.
PROCESSOR RECOMMENDED CARRIER WEIGHT RANGE
MODEL 3rd member mounting
US ton (
Metric ton
)
M35
30 - 40 ( 27 - 36 )
Specifications subject to change without notice.